Brand RepRap Megatronics V2.0 3D Printer Motherboard Main Control Panel Driver Board

Brand RepRap Megatronics V2.0 3D Printer Motherboard Main Control Panel Driver Board

SKU: 180430

0 review(s) | Add your review

    0

44.34 Unit(s) 44.34 USD


Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device.

Features:

  • Improved thermo couple support.

  • Second thermo couple supported.

  • Support for 6 stepper drivers.

  • SMD fuses and MOSFETs.

  • Extra MOSFET, making 4 regular MOSFETs and one for heated bed.

  • Support for the new DRV8825 Pololu stepper drivers

  • The board can be powered from 12V1 (12V MAX), by setting a jumper

  • The LCD contrast can be adjusted with a trimpot.

  • 12V1 has a diode to protect against reverse polarization.

  • The 5V line is protected by a 500mA resettable fuse.

  • A piezo is included to allow the printer to give feedback with sound.

  • Each stepper driver slot has a breakout to connect external stepper drivers to the board.

  • Four layer high quality PCB board.

Leave a comment

You must be logged in to post a comment.